Teradek Bolt Pro 300 Wireless Transmitter

Zero delay wireless video sender.

£70.00

Teradek Bolt Pro 300 Wireless Transmitter

The Teradek Bolt 300 is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 300ft over the unlicensed 5GHz band. The Bolt 300 has internal antennas, and is multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.

Transmitter Receiver
Video

Video resolution
1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Color sampling Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Inputs
1 x 75 Ohm BNC
No

1 x Type A receptacle HDMI

Outputs
1 x USB 3.0 micro B receptacle
1 x 75 Ohm BNC(Loop-out) 1 x 75 Ohm BNC
1 x Type A receptacle HDMI
Delay(TX to RX)

Audio

Format support 48kHz 24-bit PCM

Wireless

Frequency
Non-DFS Frequencies:
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP : 5.19 ~ 5.23 GHz
DFS Frequencies:
US : 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP : 5.27 ~ 5.67 GHz
RF power 17dBm EIRP 15dBm EIRP
Range Up to 300ft line of sight
Unicast / Multicast Unicast/Multicast Unicast/Multicast
Noise rejection Can coexist with WiFi and 5GHz cordless phones

Power

Input 2-Pin Lemo 7-28 VDC 2-Pin Lemo 7-28 VDC
Internal battery No No
Consumption(1080p60) 6.5 Watts 8.2Watts

General

LCD screen No No
Menu joystick No Yes
Size 1.06×2.61×4.42inches(27.0×66.1×112.3mm) 1.0×3.5×5.8inches(25.2×88.9×146.5mm)
Weight 9.2oz(262g) 12.2oz(346g)
Firmware Upgrade via Mini-USB
Operating temperature 0 ~ 50 deg-C

Chassis material
Cap:Plastic Cap:Plastic
Body:Milled aluminum Body:Milled aluminum

Mountability
Hot-shoe mount Hot-shoe mount
Multiple mounting options with 1/4″ holes Multiple mounting options with 1/4″ holes